Anti-Sail Kit & Replacement Parts

Stock# 1326203
Universal application rear bar kit for dump tarp roller assemblies. Fits inside sewn-in rear pocket of the dump tarp. Guide washers slide along top inside wall of the dump body or truck bed extensions.

Stock# 1326483
BUYERS 60 amp circuit breaker with auto reset is ideal for cranes, dump hoists, lift gates, plows, spreaders and winches.

Stock# 1326484
BUYERS 30 Degree Aluminum Tarp Side Joint.

Stock# 1326485
BUYERS BUYERS 60 ft. x 6 gauge dual conductor electric wire for use with roll tarp systems. (Serv. Only).

Stock# 1326486
BUYERS BUYERS 60 ft. x 8 gauge dual conductor electric wire for use with roll tarp systems. (Serv. Only).

Stock# 1326487
BUYERS 21 Spline Roll Tarp Universal Joint has a zinc plated finish for superior corrosion resistance.
Measurements: 1-1/4R, 3/8PH x 1-3/8"

Stock# 1326488
BUYERS 21 Spline x 1-13/16" Male Stub Shaft has a zinc plated finish for superior corrosion resistance.

Stock# 1326478
BUYERS Rocker Switch is a 12 volt double momentary labeled open/close.  It can be used it a variety of situations including electric dump tarp kits.

Stock# 1326479
BUYERS Rocker Switch Bracket is the bracket to mount Buyers Rocker Switch #3014187.  Mounting holes are on a 1-3/4" center.

Stock# 1326482
Aluminum Wind Deflector for Electric Tarp Kit will help reduce drag and improve fuel efficiency.  It will also protect your roller system from wind and debris.

Stock# 1326481
BUYERS Universal Flat Coil Dump Tarp System Torsion Spring.

Stock# 1326480
Buyers 12 Volt Contact Plate for electric dump tarp systems.

Stock# 1326491
The Buyers Twist Lock Plunger Pin is used on applications where a self-locking mechanism is needed. They are commonly used on sling arms, wheel lift arms, dump kits, farm implements, wrecker attachments and more. Measures: 1" diameter pin x 3-1/2" tall x 1-3/8" wide.

Stock# T1330181BP
Replacement 4-spring Aluminum Tarp Arm Kit for 8' to 14' Truck STAR® Heavy-Duty Electric Dump Body Tarp Systems.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 1330182BP
Replacement 5-spring Aluminum Tarp Arm Kit for 18' to 23' Truck STAR® Heavy-Duty Electric Dump Body Tarp Systems.

Stock# 1326473
Hi-torque, 12V, 900 watt, 90:1 direct drive motor with a 3-1/8" x 3/4" extended output shaft fits a wide range of front to back tarp systems including Donovan™ and Roll-Rite™. Chrome cover included.
Carries a 3 year warranty

Stock# 1326474
Hi-torque, 12V, 900 watt, 60:1 direct drive motor with a 3-1/8" x 3/4" extended output shaft fits a wide range of front to back tarp systems including Donovan™ and Roll-Rite™. Chrome cover included.
Carries a 1 year warranty

Stock# 1326475
Hi-torque, 12V, 900 watt, 60:1 direct drive motor with a 3-1/8" x 3/4" extended output shaft fits a wide range of front to back tarp systems including Donovan™ and Roll-Rite™. Chrome cover included.
Carries a 1 year warranty

Stock# 1326476
Heavy-Duty Rotary Switch Kit for roller tarp systems.

Stock# 1326477
Heavy-duty 50 Amp rotary switch controls forward and reverse motion of a 12-volt motor without requiring a relay. Commonly used on 12-volt truck and trailer tarp systems. Momentary on/off/momentary on lever type actuator and sillver laminated contacts. Includes screws and washers.

Stock# 1326489
The Buyers Twist Lock Plunger Pin is used on applications where a self-locking mechanism is needed. They are commonly used on sling arms, wheel lift arms, dump kits, farm implements, wrecker attachments and more. Measures: 5/8" diameter x 3-1/8" tall x 1-1/8" wide.

Stock# 1326490
The Buyers Twist Lock Plunger Pin is used on applications where a self-locking mechanism is needed. They are commonly used on sling arms, wheel lift arms, dump kits, farm implements, wrecker attachments and more. Measures: 3/4" diameter pin x 3-1/8" tall x 1-1/4" wide.

Stock# 1326385
Dump truck tarp roller kit replacement crank handle assembly. Fits all Buyers dump truck and trailer roll tarp assemblies.

Stock# 1326420
The DTG Tarp Roller Kit w/Ground Control allows you to operate your manual dump tarp roller system safely from the ground. (Tarp not included)

Stock# 1326276
Hi-torque, direct drive 12V motor with a 3-1/8" x 3/4" extended output shaft fits a wide range of front to back tarp systems including Donovan™ and Roll-Rite™. Chrome cover included
Carries a 1 year warranty

Stock# 1326414
Hi-torque, direct drive 12V motor with a 3-1/8" x 3/4" extended output shaft fits a wide range of front to back tarp systems including Donovan™ and Roll-Rite™. Chrome cover included.
Carries a 3 year warranty

Stock# 1326426
The reversing solenoid cover is molded black plastic to fit over the 12V reversing solenoid #1306600.

Stock# 1326396
The Dump Body Vibrator has 2,500 lbs. of force and frees frozen, sticky and wet material from 5 to 8 cubic yard dumps. Includes mounting kit with 50' 4AWG wire, solenoid, circuit breaker, push-button switch and steel mounting plate with fasteners.