Bimini Top Hardware & Fittings

Stock# 1197103
Keep bimini tops out of the way when not in use with the telescoping bimini top support poles.  7/8" diameter anodized aluminum pole telescopes to raise cover (28" to 48").

Stock# 5181067
The bimini top deck hinge is made of a corrosion resistant cast stainless steel that sits on a 90° angle with a spring loaded removable pin.  The base has counter sunk mounting holes and comes with the pin bolt.
Base Size: 3/4" x 2-3/8"

Stock# 5181048
The bimini top deck hinge is made of a corrosion resistant 316 stainless steel that sits on a 90° angle with a flat head removable pin.  The base has counter sunk mounting holes and comes with the pin bolt.  Base Size: 11/16" x 2-1/4"

Stock# 5181142
The bimini top deck hinge is made of a corrosion resistant cast stainless steel that sits on a 90° angle with a flat head removable pin.  The concaved base has counter sunk mounting holes and comes with the pin bolt.
Base Size: 3/4" x 2-3/8"

Stock# 5181184
The bimini top side mount deck hinge is made of a corrosion resistant 316 stainless steel that sits on a 90° angle with a flat head removable pin.  The base has counter sunk mounting holes and comes with the pin bolt.  
Base Size: 7/8" x 2"

Stock# 5181049
The angled bimini top deck hinge is made of a corrosion resistant 316 stainless steel and comes with a flat head removable pin.  The base has counter sunk mounting holes and comes with the pin bolt. Base Size: 3/4" x 2-1/4"

Stock# 5181045
The bimini top jaw slide is made of a corrosion resistant cast stainless steel that fits on 7/8" tubing.  Secure the jaw slide onto the pole with the hex head set screw.  Tubing Size: 7/8"

Stock# 5181043
The bimini top cap is made of a corrosion resistant 316 tainless steel that fits on a 7/8" tubing with an 1/4" eye.  Tighten the hex screw to secure the cap onto the bimini pole.  Cap ID: 7/8"

Stock# 5181235
The bimini top cap is made of a corrosion resistant 316 tainless steel that fits on a 1" tubing with an 1/4" eye.  Tighten the hex screw to secure the cap onto the bimini pole.  Cap ID: 1"

Stock# 5181052
The bimini top quick release pins are made of a corrosion resistant 304 stainless steel with a 6" lanyard and mounting clip.  Diameter: 1/4", Length: 1"

Stock# 5181053
The bimini top quick release pins are made of a corrosion resistant 304 stainless steel with a 6" lanyard and mounting clip.  Diameter: 5/16", Length: 1-7/8"

Stock# 5181136
The bimini pad eye is made of a corrosion resistant 316 stainless steel that the bimini straps clips onto.  The pad eye has two counter sunk mounting holes.   Length: 1-15/16"

Stock# 5181264
The bimini snap hook is made of a corrosion resistant 316 stainless steel that holes a 1" strap and snaps to pad eyes.

Stock# 5181302
The bimini top deck hinge is made of a black nylon that sits on a 90° angle. The base has counter sunk mounting holes and comes with the pin bolt.  Base Size: 13/16" x 2-3/8"

Stock# 5181304
The bimini top deck hinge is made of a black nylon that sits on a 90° angle.  The base has counter sunk mounting holes and comes with the pin bolt.  Base Size: 7/8" x 2-7/16"

Stock# 5181320
The bimini top cap is made of a black nylon fit on 7/8" tubing with an 1/4" eye.  Tighten the hex screw to secure the cap onto the bimini pole.  Cap ID: 7/8"

Stock# 5181324
The bimini top jaw slide is made of a black nylon fit on 7/8" tubing with an 3/16" hinge.  Secure the jaw slide onto the pole with the flat head screw.   Tubing Size: 7/8"

Stock# 5181328
The bimini top eye with 1/4" eye is made of a black nylon and inserts into 3/4" ID tubing.
Insert OD: 3/4"

Stock# 5181330
The bimini pad eye is made of a black nylon that the bimini straps clips onto.  The pad eye has two counter sunk mounting holes.  Length: 1-7/8"

Stock# 5181331
The bimini pad eye is made of a white nylon that the bimini straps clips onto.  The pad eye has two counter sunk mounting holes.  Length: 1-7/8"

Stock# 5181332
The bimini top head screw is made of a black nylon that secures the bimini into the desired position.  Knobs on the the screw head allows loosing and tightening easy. Bolt Size: 1/4" - 28